Constitutionalist Posted March 21 Posted March 21 Anyone have any experience with saw issues? Mine starts up and runs greats.. usually.. I fired it up last week for the first time and when I give it throttle is bogs down and cuts out. Will idle fine just can’t give it throttle to cut.. suggestions?
Constitutionalist Posted March 21 Author Posted March 21 1 hour ago, Petee said: Did you empty it last fall and then use fresh gas this spring? I ran it out last fall and put gas from the can from last year in it
Pappy Posted March 21 Posted March 21 1 hour ago, Constitutionalist said: I ran it out last fall and put gas from the can from last year in it it could be the gas. Also there are a couple of adjustments on the carb. I usually have tweak mine every year to get it running right. You just cannot adjust it to much. Constitutionalist 1
Constitutionalist Posted March 22 Author Posted March 22 5 hours ago, Pappy said: it could be the gas. Also there are a couple of adjustments on the carb. I usually have tweak mine every year to get it running right. You just cannot adjust it to much. Thanks I’ll look into both
Petee Posted March 22 Posted March 22 Gas left that long in a can will draw moisture even if it's closed tight. Get some fresh gas, change any filters and then it should run without clogging.
Constitutionalist Posted March 22 Author Posted March 22 Thank you guys. I’ll try that.. never even considered the gas in the can went bad
Constitutionalist Posted March 23 Author Posted March 23 6 hours ago, fedup said: Don't buy corn gas made by your government I try using ethanol free any chance I can fedup 1
Constitutionalist Posted March 29 Author Posted March 29 1 hour ago, Tkel said: Try putting a new spark plug in it also! I checked the plug.. it looked fine.. almost like new.. but it has been ran a few seasons.. probably a good idea.. thanks! Tkel 1
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now